Can I use PPP for processing the rover GNSS data?
You can find some information about using PPP to refine the coordinates logged for a static reference station in NovAtel's support document Adding a Base Station.
For more info on using PPP for processing the rover GNSS data, refer to NovAtel's An Introduction to GNSS, specifically Chapter 5 Resolving Errors.
Related Articles
Fixing an incorrect IMU orientation in SpatialExplorer
Fixing an incorrect IMU orientation in SpatialExplorer IMU data is relative to the IMU's own coordinate system (specified by the manufacturer), so to get IMU data in vehicle frame, we must know how the IMU is oriented in respect to the vehicle. The ...
How can I get my system boresighted?
There are two options to boresight your system detailed below: 1. You can send the system back to us for boresighting. There is a flat charge for the calibration which includes aerial acquisition and data processing. Please fill out an RMA Request ...
I collected data with the wrong rover profile. Can this be corrected when post processing in LiDARMill?
Yes, you can correct any rotation and translation values when post processing in LiDARMill. In the Navlab pipeline, ensure that the IMU to Antenna lever arm offsets and the Body to IMU Rotations are corrected. In the Spatial Fuser pipeline, ensure ...
Which antenna model do I select in SpatialExplorer or LiDARMill?
There's several steps in the lidar production workflow where it is necessary to specify an antenna model, either in SpatialExplorer and LiDARMill. Selecting Reference Station Antenna Model When importing reference station data into SpatialExplorer, ...
Utilizing Backup PLP files for Processing
It's common for hard shutdowns to corrupt important files, such as the PLP, KERNELSTART, and KERNELSTOP files. A hard shutdown refers to an improper shutdown, where the CPU on the lidar system is not able to complete it's normal shutdown process. ...